7-36
SYSTEM SETTINGS
Network Settings
Printer Settings
Disabling Deletion of Job Programs Disabled 7-74
Disabling of Bypass-Tray in Duplex Copy Disabled 7-74
Disabling of Auto Paper Selection Disabled 7-74
Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-74
600dpi x 600dpi Scanning Mode for Document Feeder Disabled 7-74
Quick Scan from Document Glass Enabled 7-74
Auto Clear Before Copy Job Execution Disabled 7-74
Item Factory default setting Page
n Network Settings
7-75
l
IPv4 Settings DHCP 7-75
l
IPv6 Settings Disabled 7-75
l
Enable TCP/IP Enabled 7-75
l
Enable NetWare Disabled 7-75
l
Enable EtherTalk Disabled 7-75
l
Enable NetBIOS Disabled 7-75
l
Reset the NIC – 7-75
l
Ping Command – 7-75
Item Factory default setting Page
n Printer Settings
7-77
l
Default Settings 7-77
Prohibit Notice Page Printing Enabled 7-77
Prohibit Test Page Printing Disabled 7-77
A4/Letter Size Auto Change Disabled 7-77
Print Density Level 3 7-77
Bypass Tray Settings 7-77
Enable Detected Paper Size in Bypass Tray Disabled 7-77
Enable Selected Paper Type in Bypass Tray Enabled 7-77
Exclude Bypass-Tray from Auto Paper Select Disabled 7-77
Job Spool Queuing* Enabled 7-77
Disabling of USB Memory Direct Print* Disabled 7-77
Item Factory default setting Page
To Next Page
Loading...
