Sharp MX-M365N - Page 16

MAINTENANCE
SHARP
16
SHARP Document Solution Centre
MX-M365N
MX-M465N
MX-M565N
Description
Every
300K
Every
300K
Fuser Section:
In addition to Total K maintenance if indicated:-
X
Replace Upper Heat Roller Kit (MX-362UH)
 Upper Heat Roller.
 Upper Separation Pawl & Springs.
 Apply Grease UKOG-0323FCZ1 to UHR
X
Replace Upper Heat Roller Kit (MX-560UH)
 Upper Heat Roller.
 Upper Separation Pawl & Springs.
 Apply Grease UKOG-0235FCZZ to UHR
X
Replace Lower Heat Roller Kit (MX-362LH)
 Lower Heat Roller.
 Lower Separation Pawl & Springs.
 Apply Grease UKOG-0235FCZZ to LHR Shaft
X
Replace Lower Heat Roller Kit (MX-560LH)
 Lower Heat Roller.
 Lower Separation Pawl & Springs.
 Apply Grease UKOG-0235FCZZ to LHR Shaft
X
Replace Web Cleaning Kit (MX-362WC)
 Web Roller.
 Web Pressure Roller.
 Web Pressure Roller Bearing.
X
Replace Web Cleaning Kit (MX-560WC)
 Web Roller.
 Web Pressure Roller.
 Web Pressure Roller Bearing.
Check & Clean Upper and Lower Thermistors.
Sim 24-04 Clear Fusing Web Counter.
Clear Fusing Roller Counter.
Clear Press Roller Counter.
Clear Separation Pawl Counter.
Transfer Section:
Replace Primary Transfer Kit (MX-560TU)
 Transfer Roller.
 Discharge Plate.
Sim 24-04 Clear TC Roller Counter.