Sharp MX-M365N - Page 15

SHARP
MAINTENANCE
SHARP Document Solution Centre
15
Interval Checklist
Description
Every
300K*
Every
600K*
Process Section -MONOCHROME:
(When the Total / K maintenance counter has reached the life specified).
x
Replace Black Developer (MX-560GV).
x
Replace DV Filter Kit (MX-560DS)
Replace Black Drum (MX-560DR)
Replace Main Charger Kit (MX-560MK)
 Drum Cleaning Blade.
 Molt Cushion for Side Seal F/R.
 Drum Separator Pawl Unit.
 Main Charge Unit
 Side Sheet F/R for Toner Reception Seal
Check/Replace Waste Toner Collector (MX-560HB).
Replace Ozone Filter Kit (MX-361FL).
x
Sim 24-05 Clear Developer K (Black) Counter.
Sim 24-04 Clear Drum K (Black) Counter.
Clear Main Charger K (Black) Counter.
Clear Drum Blade K (Black) Counter.
Clear Maintenance [ALL] Counter.
Clear Ozone Filter Counter.
Sim 25-02* Toner Concentration Auto Adjustment - Select K.
Note: *
When Sim 25-02 is executed, the Developer Counter
(Sim 24-05) is also cleared automatically.
Caution:
Ensure the toner cartridge is removed, prior to executing Sim 25-02.
Image Quality Adjustments - ALL (After Replacement Described Above):
Sim 44-02 Image Density & Registration Sensor Adjustment.
Sim 44-06 Process Control execution.
Sim 46-74 Automatic Engine Calibration Adjustment (Copy & Printer).
Sim 46-02 Check/Adjust Copy Exposure Density (B/W).
Paper Feed & Transport:
Check/Clean Paper Dust Removal Unit.
Check/Clean all Paper Path Sensors (including Duplex unit).
Check/Clean/Replace PF Rollers (check tray counter using Sim 22-09).
Sim 24-04 Clear PS Paper Counter.
General:
Clean all optics, CCD, and white reference plate.
Clean all DSPF sensors.