TRAY 3 - 4 (STAND/500&2000 SHEET PAPER
DRAWER)
Overview
A maximum of 1,150 sheets of 8-1/2"×11" (A4) paper can be loaded into tray 3.
A maximum of 850 sheets of 8-1/2"×11" (A4) paper can be loaded into tray 4.
Operation
Gently pull the tray out until it stops.
Load the paper with the print side facing up. The stack must not be higher than the indicator
line (maximum of 1,150 sheets for tray 3, or maximum of 850 sheets for tray 4).
If you loaded paper of a different type or size from the paper previously loaded, be sure to check the
settings in "Setting mode". An incorrect setting may cause print failure, printing on paper of an
incorrect size, or type or paper misfeeds.
To check the type and size of paper:
In "Setting mode", select [System Settings] → [Paper Tray Settings].
Do not place heavy objects on the tray or press down on the tray.
Pull out the paper tray
Lift the feed roller, and place paper into the tray
Fan the paper well before loading it. If the paper is not fanned, multiple sheets may feed at once
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
117 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
