EasyManua.ls Logo

Sharp MX-M365N - Page 1276

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THE IMAGE IS TOO LIGHT OR TOO DARK
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " "position. Wait at least 10 seconds
and then turn the main power switch to the " "position. After the main power indicator
color changes to green, press the [POWER] button.
Point to check Solution
Does the image (p
articularly a photo)
need correction?
(Windows)
Check the settings of the printer driver.
Correct brightness and contrast with [Color Adjustment Settings] on the [Adva
nced] tab of the printer driver. Use these settings to make simple corrections i
n a case such as when image editing software is not installed on your compute
r.
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1276 of 1441 3/17/2016 7:14 AM