TEXT AND LINES ARE FAINT AND DIFFICULT
TO SEE
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " "position. Wait at least 10 seconds
and then turn the main power switch to the " "position. After the main power indicator
color changes to green, press the [POWER] button.
Point to c
heck
Solution
Was color d
ata printed i
n black and
white?
(Windows)
Check the settings of the printer driver.
When color text and lines are printed in black and white, they may become faint and di
fficult to see. To have color text or lines (areas) that could become faint converted to
black, select [Text To Black] or [Vector To Black] on the [Advanced] tab of the printe
r driver. (Raster data such as bitmap images cannot be adjusted.)
You can also adjust the line thickness, adjust the line width in [Line Width Settings] o
n the [Advanced] tab.
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1277 of 1441 3/17/2016 7:14 AM