"Setting mode" → [System Settings] → [Image Send Settings]
→ [Fax Settings] → [Send Settings] → [Recall in Case of Comm
unication Error].
To cancel the transmission, tap the job status display on the oper
ation panel, tap the key of the print job that you wish to delete, a
nd tap the [Stop/Delete] key. A message will appear to confirm t
he cancelation. Tap the [Cancel] key.
The machine supports error correction mode (ECM) and is config
ured to automatically resend any part of a fax that is distorted du
e to noise on the line.
"Setting mode" → [System Settings] → [Image Send Settings]
→ [Fax Settings] → [Default Settings] → [ECM]
Does a message appear indicatin
g that the memory is full?
Divide the originals into sets and fax each set separately,
or use direct transmission.
If the memory becomes full, the transmission will be canceled.
Does a message appear notifyin
g you that the original size was
not detected?
Place the original again.
If the original size is still not detected correctly, specify the origin
al size manually.
Does the job status screen (co
mpleted jobs) or a transaction re
port indicate that the transmissi
on was not successful?
Perform the transmission again.
If the transmission is still not successful after recalling is perform
ed as set in [Recall in Case of Line Busy] or [Recall in Case of C
ommunication Error], the transmission failure will be indicated in t
he job status screen and the transaction report.
"Setting mode" → [System Settings] → [Image Send Settings]
→ [Fax Settings] → [Send Settings] → [Recall in Case of Line B
usy]
"Setting Mode" → [System Settings] → [Image Send Settings]
→ [Fax Settings] → [Send Settings] → [Recall in Case of Comm
unication Error]
Did you place a long original on t
he document glass when it is sc
anned?
Place the original in the document feeder tray of the auto
matic document feeder.
A long original cannot be scanned from the document glass.
Did you place an original that is f
olded?
Following the instructions in the display, unfold the original
, place it in the automatic document feeder again, and re-s
can it.
If a folded original is placed in the automatic document feeder, an
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1282 of 1441 3/17/2016 7:14 AM