EasyManua.ls Logo

Sharp MX-M365N - Page 1284

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THE TRANSMITTED FAX PRINTS OUT BLANK
AT THE RECEIVING SIDE
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " "position. Wait at least 10 seconds
and then turn the main power switch to the " "position. After the main power indicator
color changes to green, press the [POWER] button.
Point to check Solution
Is the original placed face up or f
ace down correctly?
Place the original again in the correct orientation, and res
end.
When using the document glass, the original must be placed face
down. When using the automatic document feeder, the original m
ust be placed face up. Place the original correctly and send the f
ax again.
If the receiving machine is using
thermal paper, was the thermal p
aper loaded with the wrong side
out?
Check with the operator of the other machine.
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1284 of 1441 3/17/2016 7:14 AM