EasyManua.ls Logo

Sharp MX-M365N - Page 1285

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THE TRANSMITTED FAX IS REDUCED BY THE
RECEIVING FAX MACHINE
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " "position. Wait at least 10 seconds
and then turn the main power switch to the " "position. After the main power indicator
color changes to green, press the [POWER] button.
Point to check Solution
Has the rotation s
ending been set?
Enable "Rotation Sending Setting" before transmission.
When [Rotation Sending Setting] is not enabled (the image is not rotated), an ori
ginal placed in the vertical orientation may be reduced by the receiving machine.
"Setting mode" → [System Settings] → [Image Send Settings] → [Fax Setting
s] → [Send Settings] → [Rotation Sending Setting]
If "Mixed Size Original" is enabled in Others and an original with a different width
is sent, rotate transmission will be disabled.
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1285 of 1441 3/17/2016 7:14 AM