A ONE-TOUCH INDIVIDUAL KEY OR GROUP
KEY CANNOT BE STORED
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " "position. Wait at least 10 seconds
and then turn the main power switch to the " "position. After the main power indicator
color changes to green, press the [POWER] button.
Point to check Solution
Has the maximum number of keys
been stored?
Adjust the number of stored keys.
Delete one-touch keys and group keys that are not being use
d.
Have functions been disabled by th
e administrator?
Check with your administrator.
Some functions may have been disabled in the setting mode. C
heck with your administrator.
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1296 of 1441 3/17/2016 7:14 AM