A ONE-TOUCH INDIVIDUAL KEY OR GROUP
KEY CANNOT BE EDITED OR DELETED
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " "position. Wait at least 10 seconds
and then turn the main power switch to the " "position. After the main power indicator
color changes to green, press the [POWER] button.
Point to check Solution
If the key is an individual key, is t
he key included in a group?
Remove the key from the group and then edit or delete th
e key.
(If the key is included in multiple programs, it must be removed fr
om all programs.)
"Setting mode" → [Address Book]
If the key is included in multiple group keys, print the Group List i
n [Sending Address List] in the setting mode. The list will show
where the key is stored.
"Setting mode" → [System Settings] → [List Print (User)] → [S
ending Address List] → [Group List]
Is the key being used in a reserv
ed transmission or a transmission
in progress?
Wait until the transmission is finished or cancel the reserv
ed transmission and then edit or delete the key.
Is the key included in a program k
ey?
Remove the key from the program and then edit or delete
the key.
(If the key is included in multiple programs, it must be removed fr
om all programs.)
[Call Program] → [Delete] in the action panel for each mode
Is the key that you wish to edit o
r delete stored as a relay destinat
ion of an F-code relay broadcast
transmission?
Remove the key from the relay destinations of the F-code
relay broadcast transmission and then edit or delete the k
ey.
An individual or group one-touch key that is stored as a relay de
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1297 of 1441 3/17/2016 7:14 AM