THE QUALITY OF THE SCANNED IMAGE IS
POOR
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " " position. Wait at least 10
seconds and then turn the main power switch to the " " position. After the main power
indicator color changes to green, press the [POWER] button.
Point to chec
k
Solution
Is the original p
rinted matter s
uch as a book
or magazine?
To reduce the moire effect, take the following procedure:
When the original is printed matter, vertical patterns (moire) may occur. Select [Ot
hers] → [Sharpness] in the Base Screen and soften the edges of image to reduce
the moire effect (only in "E-mail", "FTP/Desktop", "Network Folder", and "Scan
to External Memory Device"). It may also be possible to reduce the moire effect b
y changing the resolution setting or shifting the original (or changing its angle) slig
htly on the document glass.
When scanning
a color or grays
cale original, is
the color mode
set to [Mono2]
?
Setting the color mode to [Mono2] replaces the colors in the original with either bl
ack or white. This is suitable for text-only originals; however, for originals that con
tain illustrations, it is best to use the [Start] key with the color mode set to [Grays
cale], or set the color mode of the [Start] key to [Full Color] or [Auto] → [Graysc
ale] and then scan.
Is a destination
included that h
as [TIFF-S] sel
ected for the fo
rmat?
If you wish to send an image scanned at high resolution to destinations fo
r "E-mail", "FTP/Desktop", and "Network Folder", send the image to sca
nner and Internet fax destinations separately.
When a broadcast transmission is performed that includes both destinations for "E
-mail", "FTP/Desktop", and "Network Folder" and Internet fax destinations that
have [TIFF-S] selected for the format, the resolution will remain fixed at [200x200
dpi] even if a different resolution setting is selected.
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1309 of 1441 3/17/2016 7:14 AM