EasyManua.ls Logo

Sharp MX-M365N - Page 1308

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THE SCANNED IMAGE IS CLIPPED
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " "position. Wait at least 10 seconds
and then turn the main power switch to the " "position. After the main power indicator
color changes to green, press the [POWER] button.
Point to che
ck
Solution
Is the original
scan size sett
ing smaller tha
n the actual o
riginal size?
Set the scan size to the actual original size.
If you have intentionally set a smaller size than the actual original size, place the ori
ginal considering the reference placement position for the selected scan size. For e
xample, when scanning an 8-1/2" x 11" (A4) original using a 5-1/2" x 8-1/2" (B5)
setting on the document glass, align the original using the document glass scale at t
he left edge to fit the area you wish to scan into the 5-1/2" x 8-1/2" (B5) scannin
g area.
- "DOCUMENT GLASS"
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1308 of 1441 3/17/2016 7:14 AM