EasyManua.ls Logo

Sharp MX-M365N - Page 1307

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CANNOT WRITE TO THE USB MEMORY
DEVICE
(WHEN USING USB MEMORY SCAN)
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " "position. Wait at least 10 seconds
and then turn the main power switch to the " "position. After the main power indicator
color changes to green, press the [POWER] button.
Point to check Solution
Is the connected USB device re
cognized correctly?
Use [USB-Device Check] in the setting mode to check wh
ether or not the device is recognized.
"Setting mode" → [System Settings] → [USB-Device Check]
If it is not recognized, connect it once again.
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1307 of 1441 3/17/2016 7:14 AM