SELECTING A PROCEDURE FOR PLACING THE
ORIGINAL DEPENDING ON THE TYPE AND
STATUS OF THE ORIGINAL
Place the original in the automatic document feeder. Depending the type and status of the
original, use the document glass. Follow the instructions to select the method for placing
the original.
To place it in the automatic document feeder, see "AUTOMATIC DOCUMENT FEEDER".
Originals that can be placed in the automatic document feeder
by changing the setting or the placing manner:
Original containing pages of different sizes
Set [Mixed Size Original] in "Others".
An original cannot be detected if all pages are of the same size but some of them
are set in a different orientation.
Thin original 9 lbs. to 14 lbs. (35 g/m
2
- 49 g/m
2
)
Set [Slow Scan Mode] in "Others".
For this type, 2-sided scanning is disabled.
If originals have damp spots due to correction fluid, ink or pasteup glue, wait until the originals
are dry before making copies. Otherwise the interior of the machine or the document glass
may be soiled.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
131 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
