EasyManua.ls Logo

Sharp MX-M365N - Page 1326

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THE OPERATION PANEL CANNOT BE USED
Point to check Solution
Is the main pow
er indicator lit?
If the main power indicator is not lit up, turn the machine's power on.
Make sure that the power plug is firmly inserted in the power outlet, switch the m
ain power switch to the " " position, and press the [Power] button to turn on t
he power.
Did you just po
wer on the mac
hine?
Wait until a message appears indicating that the machine is ready.
After the [Power] button is turned on, the machine requires some time to complet
e warmup operation. During warmup operation, functions can be selected, but a jo
b cannot be run.
Is the [Power S
ave Mode] butto
n blinking?
Auto Power Shut-Off mode has activated. To return the machine to norm
al operation, press the [Power Save Mode] button.
- "AUTO POWER SHUT-OFF TIMER"
Is a cover open
or a device sepa
rated from the
machine?
Read the message and take appropriate actions.
A warning message will appear when a cover is open or a device is separated from
the machine.
Did login fail thr
ee times in a ro
w?
After operation unlocks, log in using the correct user information.
When [A Warning when Login Fails] is enabled in the setting mode and login fails 3
times in a row, a warning will be displayed and user authentication operation will lo
ck for 5 minutes. (If you do not know your user information, contact your administ
rator.)
"Setting mode" → [User Control] → [Default Settings] → [A Warning when Logi
n Fails]
Does a message
appear indicatin
g that Auto Logi
n failed?
Check with your administrator.
Auto Login failed due to network or other problems. If you are the administrator, t
ap the [Administrator Password] key, log in as an administrator, and temporarily ch
ange the auto login settings in the setting mode. (Restore the changed settings t
o their original state after the problems have been solved.)
Does the messa
ge "Call for serv
ice. Code:xx-xx
Turn on the machine power again.
Make sure that the background color of the job status display at the upper right c
orner of the touch panel is gray, and press the [Power] button and then turn the
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1326 of 1441 3/17/2016 7:14 AM