SMUDGES APPEAR ON PRINTED OUTPUT
Point to check Solution
Are you using paper that i
s not within the specificati
ons?
Use SHARP-recommended paper.
Using paper that is for other models or special paper that is not support
ed may result in misfeeds, creases, or smudges.
- "SUPPLIES" in "Quick Start Guide"
Are you printing on pre-pu
nched paper?
Take care that the image does not overlap the punch holes.
If the printed image overlaps the punch holes, smudges may appear on t
he reverse side of the paper following 1-sided printing, or on both sides
following 2-sided printing.
Does a message appear in
dicating the need for maint
enance?
Contact your dealer or nearest SHARP Service Department as s
oon as possible.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1338 of 1441 3/17/2016 7:14 AM