PRINTING TAKES PLACE ON THE WRONG
SIDE OF THE PAPER
*
Point to check Solution
Is the paper loaded w
ith the print side faci
ng in the correct dire
ction?
Make sure that the print side of paper is facing in the correct directi
on.
Trays 1 to 4:
Load the paper with the print side facing up
*
.
Bypass tray and tray 5:
Load the paper with the print side facing down
*
.
When the paper type is "Pre-Printed" or "Letter Head", load the paper i
n the opposite way. (Except when [Disabling of Duplex] is enabled in the
setting mode (administrator). For information about the setting mode, con
sult your administrator.)
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1341 of 1441 3/17/2016 7:14 AM