A COVER OR INSERT IS NOT PRINTED ON
THE SPECIFIED PAPER
Point to check Solution
Has the paper type be
en set correctly?
Set the correct paper type for the tray that contains the paper spe
cified for the cover or insert.
If the paper type set for the cover or insert is not the same as the paper ty
pe set for the tray, paper will be fed from a different tray.
"Setting mode" → [Paper Tray Settings] → [Tray Registration]
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1342 of 1441 3/17/2016 7:14 AM