THE FINISHER/SADDLE FINISHER DOES NOT
OPERATE
Point to check Solution
Does a message appear indicating that you need to rem
ove paper from the stapler compiler?
Remove all remaining paper from the
stapler compiler.
Does the following message appear in the touch panel?
"The finisher is in trouble. xx-xx*" *Letters and number
s appear in xx-xx.
Check the cable connection of the fi
nisher.
Remove and then firmly reinsert the cabl
e, and restart the machine.
Have functions been disabled by the administrator? Check with your administrator.
Some functions may have been disabled i
n the setting mode.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1345 of 1441 3/17/2016 7:14 AM