STAPLING DOES NOT TAKE
PLACE
(INCLUDING SADDLE STITCH)
*
Point to check Solution
Does a message appear inst
ructing you to check the st
aple unit?
Remove jammed staples.
- "REMOVING MISFEEDS" in "OPERATIONS COMMON TO ALL MO
DES"
Does a message appear inst
ructing you to add staples?
Replace the staple cartridge.
Do not forget to replace the staple case.
- "REMOVING MISFEEDS" in "OPERATIONS COMMON TO ALL MO
DES"
Is a different width of paper
mixed in?
To perform mixed size stapling, use paper of the same width an
d select the [Same Width] setting.
Stapling is not possible when paper of different widths are mixed toget
her. When copying, select [Same Width] for [Mixed Size Original] in [O
ther].
Are there more sheets than
can be stapled at once?
For the maximum number of sheets that can be stapled, see "
SPECIFICATIONS" in Quick Start Guide.
Is a paper size that cannot b
e stapled included in the pri
nt job?
For the paper size that can be stapled, see "SPECIFICATIONS
" in Quick Start Guide.
Is the paper type setting of t
he tray selected in the print
er driver set to a paper type
that cannot be stapled?
Check the paper type settings in the machine and select a tray that h
as paper that can be used for stapling
*
. Click the [Details] button in [
Paper Selection] on the [Paper Select] tab of the printer properties w
indow and check the paper type setting of each tray.
Stapling is not possible on labels, tab paper, glossy paper, transpar
ency film, or envelopes. In addition, if "Disable Staple" is selected
in the user type, stapling will not be possible.
Have functions been disable
d by the administrator?
Check with your administrator.
Some functions may have been disabled in the setting mode.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1346 of 1441 3/17/2016 7:14 AM