REGISTERING A NEW BILLING CODE
Overview
Register a new billing code.
A billing code can be registered not only from the billing code entry window but also from "Setting
Mode".
Shared range of billing code
The registered billing codes can only be shared in the specified group at the time of user
authentication.
If the shared range is not specified, the registered billing codes are shared by all users.
Operation
To register a new sub code, tap the [Select from List] key of the sub code.
The subsequent steps are the same as for the main code.
To register a billing code from Setting Mode
Select "Setting Mode" - [Billing Code Setting] - [Main Code List] or [Sub Code List]. Register a main
code in [Main Code List], and a sub code in [Sub Code List].
A total of up to 2,000 main and sub codes can be registered.
To register a group
Select "Setting Mode (Administrator)" - [User Control] - [Organization/Group List].
When the billing code entry window is displayed, tap the [Select from List] key of the
main code.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
168 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
