Specify the code using up to 32 single-byte characters.
When not specifying a billing code
Tap the [No Use of Billing Code] key. The use code is set to the main code.
Tap the text box of [Sub Code], then enter the sub code.
Tap the [OK] key
To clear the value of the specified billing code
Tap the [CA] key. Enter the billing code again.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
167 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
