Use this lever to remove the staple case.
Tap the name to make its details pop up.
Supplies
The finisher requires the following staple cartridge:
Staple cartridge (approx. 5000 staples per cartridge x three cartridges)
MX-SCX1
Finisher maintenance
When the staple cartridge runs out of staples, a message will appear in the operation
panel. Follow the operation procedure to replace the staple cartridge.
Operation
Replacing the cartridge
A finisher cannot be installed simultaneously with a saddle finisher.
Exercise caution when you turn on the power and when printing is taking place,
as the output tray may move up and down.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
18 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
