EXTERNAL ACCOUNT
The external account module enables you to use an "external account application" for
centralized account management of a n MFP on a network.
External account application setup
Operation in external account mode
An "external account application" can be used in "external authentication mode" or
"external count mode".
When "external authentication mode" is used, the login screen is retrieved from the
application when the machine is started. When a job ends, a job notification screen is sent
to the application for counts by authenticated user.
When "external count mode" is used, the login screen is not displayed when the machine is
started. Only a job result notification is sent to the application. User authentication by the
external account application cannot be used. However, the external account application
can be used in combination with the internal account function.
External account application setup
After setting an external application in "Setting Mode", restart the machine to enable the
setting.
To restart the machine, see "TURNING ON THE POWER".
Operation in external account mode
The following describes operation in the two modes for using an external account
application.
External authentication mode
When the machine is powered on in external authentication mode, the machine accesses
To set up external account application:
In "Setting mode", select [Application Settings] → [External Applications Settings] →
[External Accounting Application Settings].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
185 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
