the external account application and displays the login screen. The login screen also
appears when the [Call] key is tapped to run a job in the job status complete screen. (The
login screen does not appear if the user has already logged in by the normal method.)
Tap the job status display while the login screen is displayed, and the Job Status screen
appears. To return to the previous screen, tap a mode select key.
If login fails:
If the login screen fails to appear or the application does not operate correctly, the
machine may also stop operating correctly. In that case, terminate external account mode
forcibly.
External count mode
Unlike in external authentication mode, when the machine is started in "external count
mode", the login screen of the external account application is not displayed after the
machine has started up. Only the job result is sent to the external account application.
External count mode can be used together with the user control function of the machine.
(External count mode can also be used when the user control function is disabled.)
To enable external authentication mode:
In "Setting mode", select [System Settings] → [Sharp OSA Settings] → [External Account
Setting] and enable the [Enable Authentication by External Server] checkbox.
The user control function of the machine cannot be used in external authentication
mode.
However, "User Registration", "User Count Display", "User Count Reset", "User
Information Print", and "The Number of User Name Displayed Setting" can be used.
The mode select key cannot be used while the login screen appears.
To forcibly terminate external account mode:
In "Setting mode (Web version)", select [System Settings] → [Sharp OSA Settings] →
[External Account Setting].
If termination in Setting mode (Web version) fails, terminate it forcibly on the operation panel
of the machine.
In "Setting mode", select [System Settings] → [Sharp OSA Settings] and change the
setting for [External Account Setting] and then restart the machine. To restart the machine,
see "TURNING ON THE POWER".
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
186 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
