Go to the machine's Web page by placing the machine's IP address into the
browser.
Log in as an administrator.
Click [User Control], [Authority Group List] in the Web page menu. Then select
[Add].
Create a group name.
Example: "Card Holder Authority"
Select all the proper MFP permissions with the guidance and approval of your
network administrator.
Make sure that "Display only the Files of Logged-in Users" is set to "Allowed",
and then click the [Submit] button.
Next click [User Control], [User List] in the Web page menu. Then select [Add].
Create / Register a card holder user, who has a CAC card.
Enter a User Name.
Example: "Card Holder"
Enter an Initial.
Example: "CH"
Select the authority group ("Card Holder Authority") as set up in step 3.
All CAC cardholders will belong to this group and have this specific set of permissions.
Under [System Settings] tab it is recommended to make sure that the "Clock Adjust" is set
to "Prohibited" and then click the [Submit] button.
Set the authenticating settings according to the direction of your network
administrator.
Authentication Settings: Normally the authentication is performed locally to the
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
189 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
