A peripheral CAC card reader (MX-EC50) can be installed to perform user authentication
by CAC card (Common Access Card). Make sure that the CAC card reader is correctly
connected to the machine and then perform authentication. When authentication is
initiated using the CAC card reader, the following login screens appear:
When Device Account Mode is not used, or when only Card Holder can access MFP.
The above login screen will appear to let you perform the login procedure. Users with a
CAC card should insert their card to login.
When Device Account Mode is used, or when Card Holder and Site Guest can access
the MFP.
Users with a CAC card should insert their card to login. Users without a CAC should tap
the . The usual base screen will appear, however, the functions that can be used are
restricted (depending on the machine / group settings).
To use authentication by CAC card, consult your dealer or nearest SHARP Service
Department.
If users without a CAC are permitted to use the multifunction machine in the system
settings, a message screen will appear upon selecting a function, which is not
permitted.
Users should tap the [Login] key. The above login screen will appear to let you
perform the login procedure. Users without a CAC should tap the . The usual
base screen will appear, however, the functions that can be used are restricted in
the system settings.
When "Display only the Files of Logged-in Users" is set to "Allowed", no files
appear in the Document Filing folder without logging in. Make sure you login before
going to Document Filing folder.
System Settings (Administrator): User Authentication
This specifies whether or not CAC card authentication is used. To configure this
setting, click [User Control] and then [Default Settings] in the Web page menu.
(Administrator rights are required.)
For details, see "User Control Settings" .
System Settings (Administrator): CAC Configuration Settings
This sets the CAC card authentication method. To configure this setting, select
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
197 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
