When you have finished using the machine, tap [Logout] or just remove the CAC
card.
Remove the CAC card from the CAC card reader.
performed based on the information in the card. LDAP authentication can be used if
an LDAP service is provided on your LAN (local area network) by your server
administrator.
To perform authentication using an LDAP server, the LDAP server used for
authentication must be set in the system settings (administrator).
To store, change, or delete a root certificate used for LDAP server or PKI server
authentication, click [Security Settings] → [Certificate Management] in the Web
page menu. (Administrator rights are required.) To import a file, use the [Import]
button.
For the procedure for entering text, see "NAMES AND FUNCTIONS OF SOFT
KEYBOARD KEYS" .
To return to the login screen without performing CAC card authentication, tap the .
System Settings (Administrator): Perform LDAP server access control
Set the LDAP server that is used when authentication using an LDAP server is
performed.
To configure this setting, select [User Control] → [Various Settings] in the Web
page menu. (Administrator rights are required.)
System Settings (Administrator): CAC Configuration Setting
Specify whether or not "Domain User Check" and "PKI Certificate Check" are
performed. To configure these settings, select [User Control] → [User Count] →
[CAC Configuration Settings] in the Web page menu. (Administrator rights are
required.)
For details, see "CAC Configuration Settings" .
If a preset duration of time elapses after the machine is last used, the Auto Clear function will
activate. When Auto Clear activates, logout takes place automatically.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
199 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
