EXTERIOR
This section describes the names and functions of the respective parts on the exterior of the
machine.
Tap the name to make its details pop up.
Automatic document feeder
This automatically feeds and scans multiple originals.
Both sides of 2-sided originals can be automatically scanned at one time.
- AUTOMATIC DOCUMENT FEEDER
Front cover
Open this cover to switch the main power switch to "On" or "Off" or to replace a toner cartridge.
- TURNING ON THE POWER
- REPLACING THE TONER CARTRIDGE
Output tray (center tray)
*
Printed paper is output into this tray.
Operation panel
This panel hosts the [Power] button, [Power Save] button/indicator, [Home Screen] button, main power button
and touch panel.
Use the touch panel to operate each of these functions.
- OPERATION PANEL
Right tray
*
Set so that paper is output into this tray as required.
By setting originals received via fax or Internet fax to be output into this tray, you can separate them from
paper output from copying.
Finisher
*
This staples paper.
A punch module can also be installed to punch holes in output paper.
- FINISHER
Saddle finisher (large stacker)
*
This staples and folds paper. A punch module can also be installed to punch holes in output paper.
- SADDLE FINISHER (LARGE STACKER)
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
2 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
Need help?
General
