Sharp MX-M365N

Paper pass unit
*
This unit sends printed paper to the finisher (large stacker), saddle finisher or saddle finisher (large stacker), or
functions as a relay between the machine and the finisher (large stacker), saddle finisher or saddle finisher
(large stacker).
USB port (A type)
This is used to connect a USB device such as a USB memory device to the machine. For the USB cable, use a
shielded cable.
Supports USB 2.0 (Hi-Speed).
Keyboard
Use this as a substitute for the soft keyboard displayed on the touch panel. When not being used, it can be
stored under the operation panel.
Tray 1
Store paper in this tray.
- LOADING PAPER INTO A TRAY
Tray 2 (when a stand/500/2x500/3x500/500&2000 sheet paper drawer is installed)
*
Store paper in this tray.
- LOADING PAPER INTO A TRAY
Tray 3 (when a stand/2x500/3x500 sheet paper drawer is installed)
*
Store paper in this tray.
- LOADING PAPER INTO A TRAY
Tray 4 (when a stand/3x500 sheet paper drawer is installed)
*
Store paper in this tray.
- LOADING PAPER INTO A TRAY
Tray 5 (when a large capacity paper tray is installed)
*
Store paper in this tray.
- LOADING PAPER INTO A LARGE CAPACITY TRAY
Bypass tray
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" x 11"R or A4R, pull out the extension guide.
- LOADING PAPER INTO THE BYPASS TRAY
Tray 3 (when a stand/500&2000 sheet paper drawer is installed)
*
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
3 of 1441 3/17/2016 7:14 AM