FINISHER (LARGE STACKER)
Overview
This device outputs sorted paper while staggering each set of paper. As needed, it staples each set.
To punch holes in printed paper, install an optional hole punch module.
Function names
Supplies
Finisher (large stacker) maintenance
Function names
Output tray (upper tray, lower tray)
Stapled and offset output is delivered to this tray.
The tray is slidable. Extend the tray for printing on large-size paper (12" x 18", 11" x 17", 8-1/2" x 14",
8-1/2" x 13", A3W, A3 and B4 sizes).
Top cover
Open this cover to remove a paper misfeed.
Staple compiler
This temporarily stacks paper to be stapled.
Front cover
Open this cover to replace the staple cartridge or remove a staple jam.
Tap the name to make its details pop up.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
22 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
