Supplies
The finisher (large stacker) requires the following staple cartridge:
Staple cartridge (approx. 5000 staples per cartridge x three cartridges)
AR-SC2
Finisher (large stacker) maintenance
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow
the operation procedure to replace the staple cartridge.
A paper pass unit is required to install a finisher (large stacker) as well as a stand/500/2x500
/3x500/500&2000 sheet paper drawer.
Do not place heavy objects on the finisher (large stacker) or press down on the finisher (large
stacker).
A finisher (large stacker) cannot be installed simultaneously with a finisher, saddle finisher or
saddle finisher (large stacker).
Exercise caution when you turn on the power and when printing is taking place, as the output
tray may move up and down.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
23 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
