INTERRUPT COPY
Overview
This function suspends a job in progress, and preferentially prints the original specified
with interrupt copy.
When you need to make an urgent copy and the machine is busy with a long copy run or
other job, use interrupt copy.
Operation
Tap the [Interrupt] key.
The interrupt mode screen appears.
The [Interrupt] key does not appear while an original is being scanned.
Depending on the settings of the job in progress, the [Interrupt] key may not
appear.
Interrupt copy cannot be used in combination with the following functions:
Job Build, Tandem Copy, Book Copy, Card Shot, Multi-Page Enlargement, Original
Count, Proof Copy, Preview Setting, Book Divide
When you place an original on the document glass, you cannot select the 2-sided
copying, sort mode, and staple sort features to make an interrupt copy.
If any of these functions are necessary, use the automatic document feeder.
If user authentication is enabled
tap the [Interrupt] key to display the user authentication screen. Enter the user name and
password to perform user authentication.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
227 of 1441 3/17/2016 7:14 AM
To Next Page
