Pamphlet Copy
Operation
Staple ON (excluding pamphlet copy)
Saddle stitch
Staple ON (excluding pamphlet copy)
Tap the [Staple Sort] key.
Select a staple position(s).
After the settings are completed, tap .
You can view staple positions on the "PREVIEW SCREEN".
A finisher or saddle finisher is required to use the staple sort function.
A saddle finisher is required to use the saddle stitch function.
To change the output tray, tap the [Output Tray] key, and select the output
destination.
If the number of scanned originals exceeds the staple sheet limit, a message is
displayed. Tap the [Continue] or [Cancel] key.
[Continue]: Continues sorting without stapling.
[Cancel]: Cancels the staple sort setting.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
261 of 1441 3/17/2016 7:14 AM
To Next Page
