Saddle stitch
Tap the [Staple Sort] key.
Select [Pamphlet Copy].
Configure binding edge and cover settings.
MAKING COPIES IN PAMPHLET FORMAT
After the settings are completed, tap and check that the [Pamphlet Copy]
key is enabled on the staple sort screen. After you have checked it, tap .
If [Pamphlet Copy] is already specified in [Others], you do not need configure
binding edge and cover settings.
If [Pamphlet Copy] is specified in [Others], the saddle stitch screen appears.
Confirm the message shown on the screen, and tap the [On] key.
To change the output tray, tap the [Output Tray] key, and select the output
destination.
If the number of scanned originals exceeds the staple sheet limit, a message is
displayed. Tap the [Divide], [Continue] or [Cancel] key.
[Divide]: Divides the pages into sets that can be stapled and sorts them. You
cannot use this function if the cover settings are selected.
[Continue]: Continues sorting without stapling.
[Cancel]: Cancels the staple sort setting.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
262 of 1441 3/17/2016 7:14 AM
To Next Page
