Operation
Copy by automatically calculating the repeat count (Auto)
Copy by specifying a repeat count (Fixed Repeat)
Repeat a photo size original in actual size (Photo Repeat)
Copy by automatically calculating the repeat count (Auto)
Tap the [Others] key, and then tap the [Repeat Layout] key.
Tap the [Auto] key.
Check the repeat faces which have been calculated automatically.
Change the original size, paper size, or copy ratio by tapping the respective
[Original], [Paper Select], or [Copy Ratio] key when necessary.
SPECIFYING THE ORIGINAL SIZE
MANUAL RATIO SELECTION
SELECTING THE PAPER TRAY FOR COPYING
Specify the repeat partition line.
After the settings are completed, tap and [Back] keys in sequence.
Repeat Layout must be specified before scanning the original.
If the copy ratio automatically obtained in [Fixed Repeat] exceeds 25 to 400%, it
will result in an error. Select the number of faces to repeat again.
Always place an original on the document glass for photo repeating.
This function cannot be combined with Mixed Size Original or 2-Sided Copy.
To cancel the automatic settings:
Tap the [Off] key.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
274 of 1441 3/17/2016 7:14 AM
To Next Page
