Operation
Copying in job build mode
Changing the copy settings for each set of originals
Copying in job build mode
Tap the [Others] key, and tap the [Job Build] key.
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
Place the original in the document feeder tray of the automatic document
feeder, and tap the [Preview] key to scan the first original.
Insert the originals all the way into the document feeder tray. Originals can be
stacked up to the indicator line.
AUTOMATIC DOCUMENT FEEDER
will be impeded. Delete unnecessary files from the Quick File Folder.
The Job Build mode cannot be combined with other functions.
Dual Page Copy
Book Copy
Card shot
Multi-Page Enlargement
12" x 18" (A3) full bleed copy
Repeat layout
To cancel the job build mode
Tap the [Job Build] key to uncheck it.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
329 of 1441 3/17/2016 7:14 AM
To Next Page
