Changing the copy settings for each set of originals
As necessary, change copy settings for each set of originals.
Perform the steps below before scanning the next original in step 4 above.
Tap [Change the settings of the original to be scanned next] on the action
panel, and set the checkbox to .
Change copy settings.
Place the next set of originals and tap the [Additionally Scan] key.
Repeat this step until all originals have been scanned.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
331 of 1441 3/17/2016 7:14 AM
To Next Page
