PAPER FEEDING IN A WINDOWS
ENVIRONMENT
Before printing, check the paper sizes, paper types, and paper remaining in the machine's
trays. To check the most recent tray information, click the [Tray Status] button in [Paper
Selection] on the [Paper] tab.
The relationships between the "Paper Size" setting and the "Paper Selection" setting are
as follows:
When "Paper Tray" in "Paper Selection" is set to [Auto Select]
The tray that contains paper of the size and type selected in "Paper Size" and
"Paper Type" is automatically selected.
When "Paper Tray" in "Paper Selection" is set to anything other than [Auto
Select]
The specified tray is used for printing regardless of the "Paper Size" setting.
When you have set "Paper Tray" to [Bypass Tray], be sure to select "Paper Type".
Check the paper type that is set for the bypass tray of the machine, check that
paper of that type is actually loaded into the bypass tray, and then select the
appropriate paper type.
When "Paper Type" in "Paper Selection" is set to [Auto Select]
A tray with plain paper or recycled paper of the size specified in "Paper Size" is
automatically selected. (The factory default setting is plain paper only.)
When "Paper Type" in "Paper Selection" is set to anything other than [Auto
Select]
A tray with the specified type of paper and the size specified in "Paper Size" is used
for printing.
Special media such as envelopes can also be placed in the bypass tray.
For the procedure for loading paper in the bypass tray, see "LOADING PAPER INTO THE
BYPASS TRAY".
When [Enable Detected Paper Size in Bypass Tray] (disabled by factory default) or [Enable
Selected Paper Type in Bypass Tray] (enabled by factory default), which you can reach by
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
408 of 1441 3/17/2016 7:14 AM
To Next Page
