selecting [System Settings] in "Setting mode" → [Printer Settings] → [Default Settings] →
[Bypass Tray Settings] is enabled, printing will not take place if the paper size or paper type
specified in the printer driver is different from the paper size or paper type specified in the
settings of the bypass tray.
To exclude the bypass tray from the trays that can be selected when [Auto Select] is
selected:
In "Setting mode", select [System Settings] → [Printer Settings] → [Default Settings] →
[Bypass Tray Settings] → [Exclude Bypass-Tray from Auto Paper Select].
If special media are frequently loaded in the bypass tray, it is recommended that this setting
be enabled.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
409 of 1441 3/17/2016 7:14 AM
To Next Page
