The icon is displayed to the left of keys of folders in the USB memory
device. To display a folder or a file in a folder, tap this key.
Select the print conditions.
If you have selected multiple files in step 3, you can select only the number
of prints.
If you have selected a file that includes print conditions (i.e., PCL, PS, or
XPS files) in step 3, the settings will be applied.
Tap the [Start] key.
Printing begins after the selected file is transferred.
Remove the USB memory device from the machine.
A total of 100 keys of files and folders can be displayed.
Tap to move up one folder level.
When you move down a folder level by tapping a folder key, appears.
Tap this key to return to the file or folder name selection screen.
Tap the [File or Folder Name] key to change the order of the files and folders
displayed on the screen. Each time the key is tapped, the order changes between
ascending and descending.
When the [Print on Glossy Paper] checkbox is selected, [Paper Select] is set to [Glossy
Paper] (bypass tray) and [Output Resolution] is set to [600 dpi (High Quality)].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
503 of 1441 3/17/2016 7:14 AM
To Next Page
