Sharp MX-M365N - Page 504

DIRECTLY PRINTING A FILE IN A NETWORK
FOLDER
Overview
You can specify and print a file in a network folder from the touch panel of the machine.
Even if the network folder is not registered, you can access the network folder by
directly entering or referring to the path to the folder in the workgroup.
Entering the network folder path directly
Referring to the network folder path
Operation
Printing a file in the network folder you have configured in the machine's
settings
Tap the [Document Filing] key.
Tap the [Select File from Network Folder to Print] key on the action panel.
Tap the [Open Registered Network Folder] key on the action panel and tap
the network folder that you wish to access.
To register a network folder:
In "Setting mode", select [Application Settings] → [Setting for Print from the MFP(SMB)]
to store a network folder. (Administrator rights are required.) Up to 20 network folders can
be registered.
When you select a PDF file that has a password, you must enter the password in the job
status screen to begin printing.
PRINTING AN ENCRYPTED PDF FILE
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
504 of 1441 3/17/2016 7:14 AM