Sharp MX-M365N - Page 510

FTP PRINT
You can print a file from your PC by simply dragging and dropping the file onto the FTP
server of the machine.
Performing FTP print
Type "ftp://" and then the IP address of the machine in the address bar of your PC's Web
browser as shown below.
Example: ftp://192.168.1.28
Drag and drop the file that you wish to print onto the "lp" folder that appears in your Web
browser. Printing of the file automatically begins.
To perform FTP print:
In "Setting mode", select [Application Settings] → [Setting for Print from the PC], set [FTP
Print] to [Valid], and then configure the port number. (Administrator rights are required.)
If you print a file that includes print settings (i.e., PCL, PS, or XPS files), the settings
will be applied.
When user authentication is enabled in the settings of the machine, the print
function may be restricted. For more information, ask your administrator.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
510 of 1441 3/17/2016 7:14 AM