Sharp MX-M365N - Page 552

AUTOMATIC REDUCTION OF THE
TRANSMITTED IMAGE
If the width of the transmitted image is larger than the width of the paper in the receiving
machine, the image will be automatically reduced to fit the receiving machine's paper width.
Example: Reduced sizes and reduction ratios
Transmitted image wi
dth
Receiving machine's paper w
idth
Reduced size
Rati
o
11" x 17" (A3) B4 B4 1:0.8
4
11" x 17" (A3) 8-1/2" x 14", 8-1/2" x 11" (A
4)
8-1/2" x 14", 8-1/2" x 11"R (
A4R)
1:0.7
1
B4 8-1/2" x 11" (A4) A4R 1:0.8
4
To cancel the Auto Reduction Sending setting:
In "Setting mode", select [System Settings] → [Image Send Settings] → [Fax Settings] →
[Send Settings] → [Auto Reduction Sending Setting].
If this setting is disabled, the image will be sent at full size and part of the image may be cut
off.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
552 of 1441 3/17/2016 7:14 AM