USING THE AUTOMATIC DOCUMENT FEEDER
FOR TRANSMISSION
Overview
Storing scanned originals in machine's memory before transmitting them is called "Memory TX".
This section explains how to scan the original through the automatic document feeder and send the
data by the memory transmission function.
Operation
Place the original in the document feeder tray of the automatic document
feeder.
AUTOMATIC DOCUMENT FEEDER
Specify the destination fax number.
ENTERING A DESTINATION NUMBER USING THE NUMERIC KEYS
RETRIEVING A DESTINATION NUMBER FROM AN ADDRESS BOOK
To fax a thick original or other original that cannot be placed in the automatic
document feeder, open the automatic document feeder and place the original on
the document glass.
If there is a fax job in progress when the transmission operation is performed, the
fax is transmitted when the job in progress is finished.
If the memory becomes full while the originals are being scanned, a message will
appear and scanning will stop. When Quick On Line Sending is enabled for
transmission, the scanned originals are sent.
To set the scan complete sound:
In "Setting mode", select [System Settings] → [Image Send Settings] → [Operation
Settings] → [Default Settings] → [Scan Complete Sound Setting].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
561 of 1441 3/17/2016 7:14 AM
To Next Page
