CHECKING THE IMAGE TO BE TRANSMITTED
Check the image that will be sent in the touch panel before transmission.
If you tap the [Preview] key before scanning the original, you can check the status of the
scanned image in the preview screen. As you can adjust the exposure and resolution to
scan the original while checking it in the preview screen, you can send a better quality
original to the destination.
PREVIEW SCREEN
The settings and functions that can be changed while and after an image is scanned for
preview are as follows:
Exposure, Send Size, 2-Sided Booklet/Tablet, Resolution, Erase, Job Build, 2in1, Timer,
Own Name Select, and Transaction Report.
Depending on the size of the transmission data, part of the preview image may not
appear in the preview screen in the touch panel.
The preview function is not available when the original size is set to Long Size.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
560 of 1441 3/17/2016 7:14 AM
To Next Page
