recently sent to] key, or [Global Address Search] key
Tap the [Start] key to display the confirmation message.
Tap the [OK] key, re-enter the destination using the numeric keys, and tap the [Send
Confirmation] key.
If the re-entered destination is correct, scanning will begin.
If the re-entered destination is not correct, a message will appear. Tap the [OK] key and
re-enter the destination. If an incorrect address is entered three times for confirmation, all
the previous settings are canceled, and you will return to the base screen.
When a fax that was selected from the addresses sent recently has been
resent
A confirmation screen is displayed based on the method used to specify the destination
during the previous transmission.
You can use the numeric keys to enter fax numbers serially. In that case, tap
to enter the destination fax number to be added.
If the [Sub Address] key was tapped to enter a sub-address and passcode, the fax
number must be re-entered during confirmation. After re-entering the fax number,
tap the [Sub Address] key and enter the sub-address and passcode.
If chain dialing was used, tap the [Pause] key to enter "-" during confirmation.
Before tapping the [Send Confirmation] key, you can change scan or other settings.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
559 of 1441 3/17/2016 7:14 AM
To Next Page
