USING THE DOCUMENT GLASS FOR
TRANSMISSION
Overview
Storing scanned originals in machine's memory before transmitting them is called
"Memory TX".
This section explains how to scan the original placed on the document glass and send
the data by the memory transmission function.
Operation
Place the original on the document glass.
DOCUMENT GLASS
Specify the destination fax number.
ENTERING A DESTINATION NUMBER USING THE NUMERIC KEYS
RETRIEVING A DESTINATION NUMBER FROM AN ADDRESS BOOK
THE SELECTED DESTINATIONS
If a fax is being received when the transmission operation is performed, the
transmission will be reserved and transmission will take place after fax reception is
completed.
If the memory becomes full while the originals are being scanned, a message will
appear and transmission will be canceled.
Do not place any objects under the original size detector. Closing the automatic document
feeder with an object underneath may damage the original size detector plate and prevent
correct detection of the document size.
When faxing a multi-page original, scan each page in order starting from the first page.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
565 of 1441 3/17/2016 7:14 AM
To Next Page
