RESENDING TO UNSUCCESSFUL BROADCAST
TRANSMISSION DESTINATIONS
Overview
The results of a completed broadcast transmission can be checked in the job status
screen. If transmission to any of the destinations failed, resend the fax to those
destinations.
Operation
Tap the job status display, and tapping the [Fax] tab.
Tap the [Complete] key.
After tapping the key of the completed broadcast transmission, tap the
[Check Details of Selected Job] key on the action panel.
"Broadcast xxxx" will appear as the destination of the broadcast job key. The job
control number that appeared on the touch panel when scanning ended appears
in "xxxx".
If the broadcast transmission included destinations of different modes, the same
broadcast transmission key will appear in each of those modes.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
577 of 1441 3/17/2016 7:14 AM
To Next Page
